Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation

Product Details
Customization: Available
Warranty: One Year
Max.Head: 50-80m
Shipping & Policy
Shipping Cost: Contact the supplier about freight and estimated delivery time.
Payment Methods:
visa mastercard discover JCB diners club american express T/T
PIX SPEI OXXO PSE OZOW
  Support payments in USD
Secure payments: Every payment you make at Made-in-china.com is protected by the platform.
Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Manufacturer/Factory

360° Virtual Tour

Secured Trading Service
Diamond Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
353
Year of Establishment
2000-11-08
  • Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
  • Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
  • Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
  • Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
  • Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
  • Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
Find Similar Products

Basic Info.

Model NO.
NDX125-100-200
Driving Type
Motor
Impeller Number
Single-Stage Pump
Working Pressure
Low Pressure Pump
Influent Type of Impeller
Single Suction Pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Rear Opening Type Structure
Mounting Height
Since Irrigation Centrifugal Pumps
Impeller
Closed
Usage
Pump
Merge
Changsha Swan
Merge2
Wuxi Pump Works
OEM/ODM
Accept
Product Standards
DIN24255
Pump Warranty
One Year
Medium Temperature
-10-85 Celsius Degree
Normal Speed
1450rpm/2900rpm
Application
Factories, Mines, Urban Water Supply and Drainage
Sealing Type
Mechanical Seal
Transport Package
Export Plywood Case
Trademark
LEO
Origin
China
HS Code
8413709990
Production Capacity
3000set/Year

Packaging & Delivery

Package Size
1473.00cm * 747.00cm * 440.00cm
Package Gross Weight
281.000kg

Product Description

Overview
Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles.
This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control.
Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller
The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance
The pump is suitable for pumping medium at temperature of -10~85ºC and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering

Performance Parameters
Model Capacity(m³/h) Head(m) Pump efficiency (%) Shaft power (kW) Speed(rpm) Impeller outer diameter(mm) Inlet caliber(mm) Onlet caliber(mm) Motor Power(kW) Weight(kg)
NDX125-100-200 180 62 74 41.1 2900 214 125 100 75kW 85
295 54 82.5 52.6
340 48 81.5 54.6

Table Product Attribute
Attribute Attribute Attribute value
Material Impeller HT250
Pump body HT250
Pump shaft 2Cr13
Suspension HT250
Seal ring HT250
Machinery Seal Vulcan
Coupling Elastic pin
Antifriction bearing NSK
Working conditions Medium temperature(ºC) ≤85ºC
Ambient temperature(ºC) 40
Design pressure(MPa) 1.6
Installation Inlet diameter(mm) 125
outlet diameter(mm) 100
Direction of rotation Viewed from the transmission end, rotate clockwise
Entrance orientation Axial suction
Exit orientation Vertical up
Motor Number of motor phases 3
Motor power safety factor 1.2
Protection class IP54
Insulation class F
Motor power(kW) 75kW
Motor model YE2-280S-2
Power frequency(Hz) 50
Energy efficiency rating IE3
Package Weight(kg) 85

Product Features
Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level.
Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance
Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life.
Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.

Structural Features
Pump casing:Footing support structures,base support structure.The pump intakes axially and discharges from the top end.The spiral volute can bear up to 2.5Mpa of pressure.The flanges at the inlet and outlet can be drilled according to the metric system or the American system
Impeller:The closed impeller adopts excellent hydraulic model design to ensure the performance and efficiency of the pump.The impellers are 100% tested by dynamic balance test to reduce the vibration of the pump
Pump shaft:The pump is equipped with SS420 stainless steel shaft,which has wide versatility.There are more than 60 specifications in the whole series,while only six kinds of shafts are used.The same specifications of shafts,bearding,shaft sleeves,shaft seals and impeller fasteners can be interchanged
Shaft seal:It adopts high quality mechanical seals from well know domestic manufactures,the seals have long service life and no leakage,and can be equipped with auxiliary systems such as flushing and cooling
Bearing:It is imported NSK bearing that ensure a longer service life.The double closed,maintenance free bearding eliminates the need for separate lubricants,saving the time for maintenance.
Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland IrrigationElectric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation
Electric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland IrrigationElectric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland IrrigationElectric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland IrrigationElectric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland IrrigationElectric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland IrrigationElectric High Efficiency Single Stage End Suction Centrifugal Water Pump for Farmland Irrigation


FAQ
1. Q:Are you a manufacturer or trading company  
A:We are a manufacturer that specializes in industrial pump for 60 years
 
2. Q:What payment term do you prefer?
 A:Normally we take payment term 30% T/T in advance,70% paid before shipment, we can also accept L/C at sight.
 
3. Q:What about the package?
A:Standard export plywood case
 
4. Q:How long is the warranty?
A: Eighteen (18) months after delivery, twelve (12) Months from the date of commissioning, whichever comes earlier
 
5. Q:Is it acceptable to make customer's own brand?
 A: Sure, we can do OEM & ODM
 
6. Q:How many days does it take for manufacturing?
 A: It depends on order quantity and pump types. Normally it takes 20-120 days

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier